1.Apart from raising the barrel temperature what other techniques can be used to raise the melt temperature?
除了提高料管温度外，还可以使用其他什么方法来提高融料温度？
2.pressure sensor with incorporated melt temperature sensor inserted in the die adaptor near the breaker plate.
压力传感器与温度传感器整合，置于模头适配器之中。
3.edy a poor finish, increasing the melt temperature and mold temperature will also improve surface appearance when molding our materials.
伊迪一个贫困的完成，提高熔体温度和模具温度也将改善表面外观时，我们的成型材料。
4.Melt temperature and mold temperature had no influence on the hollow ratio when the temperature reached a specific range.
熔体温度升到一定范围后对中空率没有影响；
5.Do not conside the effect of the melt temperature. Use of the relationship between temperature and viscosity and shear energy formula .
利用温度和粘度的关系式及剪切能的计算公式，得到了剪切能与熔体温度的关系式。
6.The constant volumetric delivery and melt temperature reduction bring a significant improvement in the quality of the end product.
稳定的体积流量和降低熔体温度对于改善最终产品的质量有重要意义。
7.The series adjustment system that using melt temperature as main parameters was composed in HTM temperature control system.
在热媒温度控制系统中以熔体温度作为主参数，组成串极调节系统。
8.The melt temperature, stirring speed and proper shearing time were beneficial to the formation of fine globular grains.
即降低降体温度、搅拌速度及适当剪切时间有利于细小球形晶粒的形成。
9.Start by determining the true melt temperature and set the die body to that temperature.
从确定真正的熔体温度开始，然后按照这个温度设定口模体的温度。
10.With the increase of the melt temperature, the evaporation trend increases.
随着熔体温度的增加，挥发趋势也增大。